Our Process | Cabinet Pro Painters

All Painting Done On-Site

We create an airtight cocoon in your kitchen and begin the priming and painting phase. You relax and go about your business– and we go to work putting your cabinets through the most extensive professional cabinet refinishing process available. This process will leave your cabinets looking better than brand new.

Our unique process for painting cabinets separates us from others who take shortcuts. We spend a lot of time on how we prep and how we spray. This is the difference between your paint sagging, chipping, losing it’s lustre or chipping vs. our jobs which last for many, many years.

In-Home 5 Day Service

Day1

Go over plan

We will show up in the morning and go over any issue that need to be discussed as we believe Clear, Transparent, Daily Communication is the way to success.

We start by covering and protecting all surfaces to and including the area we are working in. We set up our dust barrier ZipWall system to protect your home from dust travel. Remove and label all cabinet doors, drawers, and hardware. Thoroughly clean and degrease all surfaces. Mask off and tape the area to protect other surfaces.

Day 2

Sand all built-ins, doors and drawers

Sand all built-ins, doors and drawers. Fill any cabinet cracks and imperfections with appropriate fillers that work best for the wood type we are working on.

Apply specialized Caulking any gaps to make it seamless as possible. Set up our air scrubbers and exhaust system to discharge any fumes and clean odors throughout the process.

Day 3

Apply Primer

Apply min of 2 coats of high adhesion industrial primer to built-ins, doors, and drawers with a light sand between coats. Address any issues that may need repair, set up our air scrubbers, exhaust system to discharge any fumes and clean odors throughout the process.

Day 4

Apply 2 coats of low VOC KCMA

Apply min two coats of low VOC KCMA Certified Industrial Wood Coating with added hardener made for kitchen Cabinets to built-ins, doors, and drawers.

Lightly sand between 1st coat.

Day 5

Cleanup

To start the cleanup process, we will tear down all plastic coverings and reinstall the hardware and doors we removed on the first day. Our team will ensure the floor and other surfaces are clean when we leave.

If you purchased new handles or knobs to go on your cabinets, we will install them for free. Fees may apply in the event you choose a new size. If the installation period has passed and they have not arrived, there will be an extra charge to have them installed another day.